Db2 GDPC pS missing RsCT condition

In pureScale GDPC environment, RsCT condition for bond0 missing after enter/exit maintenance mode.

PMR suggested details:
"1) when "db2cluster -cm -enter -maintenance" was run, it ran the script condrespV111_setup.ksh to delete all conditions/responses for bond0 and bond2

2) when ""db2cluster -cm -exit -maintenance" was subsequently run, it call the script again to recreate those conditions/responses, however the script only recreated the conditions/responses for the adapters for "subnets 192.168.30.0" in mmlsconfig (bond 2) , not the other interface (bond 0).

3) According to below our script condrespV111_setup.ksh, it does show that our script only creates condition for the adapter which is in the subnet as mmlsconfig output, and unless no such adapter is found, no condition will be created for other adapters.

However in your case, you have conditions/responses created for both the private adapter as in subnet (bond 2) and also the public adapter(bond0).

Currently only the Spectrum Scale heartbeat interface is used to create condition/response pairs. In GDPC's case, both of the public ethernet network and Spectrum Scale heartbeat interface(bond 2 and bone 0 respectively) are used to create the cond/resp pair.


However currently such pairs are created by the condresp setup script for the Spectrum Scale heartbeat interface, and the condresp pairs needs to be configured manually for the public ethernet.



The existing behavior of the script condrespV111_setup.ksh is meant for the adapter which is in the subnet as mmlsconfig output.


Can I request you to raise RFE (request for enhancement) so that the script condrespV111_setup.ksh will take care of public ethernet network?"